Delivers clean low ripple power to the SATA loads: Sound Cards, NVMe, SSD, HDD, CD/DVD, etc.; breaks ground loops
Suppresses electrical noise generated by SATA loads: HDD, CD/DVD, SSD, NVMe, etc.; well damped; resonance-free
Protects its load from overvoltage, short-circuit, and overcurrent failure modes with auto-resettable fuses
Compatible with SATA III 6Gb/s and all standard SATA connectors and physical device configurations
Top quality components: low ESR Solid Polymer Electrolytic capacitors; Tantalum capacitors; low loss inductors
Kevin.Guthrie (verified owner) –
We started using these in our remote monitoring equipment early in 2021 to protect the SSDs and HDDs from corruption due to dirty input power. Lifesaver is an understatement. Dirty power was causing corruption and drive failure in less than six months at some sites. That problem has been eliminated since we started using these wonderful little filters.